Yawzya that's expensive.

[PTmowerMech]

015-2750-00 Bad Boy Muffler for 27hp Kophler​ SV840-3012 They're wanting over $300 for this. It must have gold plating on the inside. Part muffler, part catalytic converter? lol

 

[Rivets]

That’s not bad, once had a 6” long 1” DIA tailpipe for an Onan muffler that had a list price of $119.00. Needed one for a unit on an RV, so manufactured one out of stainless steel pipe for less than $25.00.

 

[ILENGINE]

Just put an ECU/throttle body assembly in a 8kw portable generator a couple weeks ago. ECU was $715.

 

[bertsmobile1]

Mufflers are part of the mower
Thus they are made in small numbers unless the mower uses the factory standard muffler
Thus they are a lot more expensive
Generally I find the cheapest one for the engine then modify it to fit the mower

 

[Hammermechanicman]

Customer bought a new OEM kohler carb for close to $300 that didn't fix the problem. Brought it to me and found it had a one dead coil and the other one was intermittent.

 

[lugbolt]

those mufflers are usually not exclusive to bad boy. Look at the muffler body and see if it has any numbers on it. Sometimes they do, where the actual manufacturer stamps it. If so, just google it.

if it stamped with bad boy number, they probably make it in house.

It may very well have a cat inside of it. Wouldn't surprise me. A lot of small engines have kitty cats in the mufflers now. Price went way up on em too.

 

[hlw49]

Have seen carbs run for over $500.00 dollars.

 

[StarTech]

PT check out the following link. But they are currently on back order. I think it is because they are custom built.

AFTERMARKET REPLACEMENT MUFFLER- BAD BOY 015-2750-00 ZT ELITE - DRIVER SIDE EXHAUST EXIT BLACK CERAMICOAT HIGH HEAT

DESCRIPTION: THIS IS AN AFTERMARKET Replacement Muffler for Bad Boy Mower - INTENDED TO REPLACE OEM PART NUMBER 015-2750-00. BLACK CERAMICOAT FOR CORRISION PROTECTION. DRIVER SIDE EXHAUST EXIT. COMES WITH (4) 8MM X 1.25MM X20MM LONG SOCKET HEAD SCREWS AND (2) GASKETS APPLICATION: 2013 BAD BOY...

summitmachinesupply.com

 

[PTmowerMech]

PT check out the following link. But they are currently on back order. I think it is because they are custom built.

AFTERMARKET REPLACEMENT MUFFLER- BAD BOY 015-2750-00 ZT ELITE - DRIVER SIDE EXHAUST EXIT BLACK CERAMICOAT HIGH HEAT

DESCRIPTION: THIS IS AN AFTERMARKET Replacement Muffler for Bad Boy Mower - INTENDED TO REPLACE OEM PART NUMBER 015-2750-00. BLACK CERAMICOAT FOR CORRISION PROTECTION. DRIVER SIDE EXHAUST EXIT. COMES WITH (4) 8MM X 1.25MM X20MM LONG SOCKET HEAD SCREWS AND (2) GASKETS APPLICATION: 2013 BAD BOY...

summitmachinesupply.com

From the description:
PLEASE NOTE THIS IS AN AFTERMARKET MUFFLER AND IS NOT A 100% MATCH. THERE ARE SOME DIFFERENCESBETWEEN THIS ITEM AND THE OEM VERSION. WITH THAT SAID WE HAVE WORKED OUT MANY OF THE FITMENT ISSUES AND HAVE HAD SEVERAL CUSTOMERS SUCCESSFULLY INSTALL AND USE THIS MUFFLER ON THEIR MOWER.****

Yeah, kind of chancy. Are they hand bending all these?

 

[PTmowerMech]

Have seen carbs run for over $500.00 dollars.

The one for my Kawasaki is over $300. So I went the cheapo Amazon route. I'm glad I did. I got a 90% good one on the first try.