Woundedknees
Forum Newbie
- Joined
- Mar 28, 2021
- Threads
- 1
- Messages
- 3
I ran into an odd problem yesterday.
My (New to me) 2012 JD X 324 mower got high centered mowing some spring grass for the first time this season.
After I lifted it off the obstruction, I attempted to start the mower. When I turned the key, nothing happened.
The starter didn't spin... solenoid did not even click.
The blades were disengaged, brake was set.
When the key was in headlight on position, the lights were functional.
I checked the battery, changed out the starter related 20 amp fuse, still nothing.
This mower has run like a top since I brought it home more than 100 hours ago.
Is there a fusible link, or some other connection I should be checking? Possibly a starter relay?
Any suggestions will be greatly appreciated!
My (New to me) 2012 JD X 324 mower got high centered mowing some spring grass for the first time this season.
After I lifted it off the obstruction, I attempted to start the mower. When I turned the key, nothing happened.
The starter didn't spin... solenoid did not even click.
The blades were disengaged, brake was set.
When the key was in headlight on position, the lights were functional.
I checked the battery, changed out the starter related 20 amp fuse, still nothing.
This mower has run like a top since I brought it home more than 100 hours ago.
Is there a fusible link, or some other connection I should be checking? Possibly a starter relay?
Any suggestions will be greatly appreciated!
Last edited: