Troy-Bilt Weed eater/trimmer TB625 EC 41ADZ62C766

[sefbob]

Hi,
I need help with my weed eater/trimmer TB625. I took it apart to clean the carburetor, and now I can't remember how to put all the trimmer parts back together (embarrassing :thumbdown. I searched online for parts diagram, but they do not show in which order the parts go. Does anyone own a TB625 that can explain me how I can put it back together?

thanks,
Bob

 

[bogdaN]

Try any U-Tube video?Some are with good info.

 

[sefbob]

Thanks for replying. I watched many videos, but none of them showed the parts that I am having problems with.

 

[bertsmobile1]

lay all the parts on a piece of paper, kitchen towel is good.
Number each one , take a photo and post it.
Then we can tell you the order is 1.5.3.8.2 etc.
Better still if you can add a photo of the carb body where the makers name is.
Otherwise we will be talking jibberish to you as we will use the part names that you may not know.

 

[sefbob]

I attached 5 images.
1. all the parts with numbers.
2. I assembled the parts the way I think they go.
3. Once I put them on the trimmer, then you can see that there is a big gap in between the part 5 and the trimmer (not sure why). This is the step that is confusing me. Also the screws (part 4) seems too long.
4. A picture of how the step 2 looks installed on the trimmer.
5. High level picture of the trimmer.

 

[ILENGINE]

You may of dropped the air cleaner spacer sleeves without knowing. Look at item 20 in this diagram

https://www.partstree.com/parts/tro...ilt-string-brush-trimmer-gas/engine-assembly/

 

[sefbob]

You may of dropped the air cleaner spacer sleeves without knowing. Look at item 20 in this diagram

https://www.partstree.com/parts/tro...ilt-string-brush-trimmer-gas/engine-assembly/

That was it, I thought those spacers were for something else. Below is the image



Thanks for your help :thumbsup: