Export thread

Hi,
I need help with my weed eater/trimmer TB625. I took it apart to clean the carburetor, and now I can't remember how to put all the trimmer parts back together (embarrassing :thumbdown. I searched online for parts diagram, but they do not show in which order the parts go. Does anyone own a TB625 that can explain me how I can put it back together?

thanks,
Bob

Try any U-Tube video?Some are with good info.

Thanks for replying. I watched many videos, but none of them showed the parts that I am having problems with.

lay all the parts on a piece of paper, kitchen towel is good.
Number each one , take a photo and post it.
Then we can tell you the order is 1.5.3.8.2 etc.
Better still if you can add a photo of the carb body where the makers name is.
Otherwise we will be talking jibberish to you as we will use the part names that you may not know.

I attached 5 images.
1. all the parts with numbers.
2. I assembled the parts the way I think they go.
3. Once I put them on the trimmer, then you can see that there is a big gap in between the part 5 and the trimmer (not sure why). This is the step that is confusing me. Also the screws (part 4) seems too long.
4. A picture of how the step 2 looks installed on the trimmer.
5. High level picture of the trimmer.

You may of dropped the air cleaner spacer sleeves without knowing. Look at item 20 in this diagram

https://www.partstree.com/parts/tro...ilt-string-brush-trimmer-gas/engine-assembly/

ILENGINE said:

You may of dropped the air cleaner spacer sleeves without knowing. Look at item 20 in this diagram

https://www.partstree.com/parts/tro...ilt-string-brush-trimmer-gas/engine-assembly/

Click to expand...

That was it, I thought those spacers were for something else. Below is the image



Thanks for your help :thumbsup: