Transmission whine and crawl

S

Scratcher

Member
Joined
May 23, 2015
Messages
11
All the specs are in my profile. Mower was running fine then transmission started whining and slowed to a crawl. It will only drive if I give it very light throttle. If I push the drive lever full forward or back it stops and makes a loud whining/grinding noise. Is my tranny shot? I am so over this POS SABRE
 
That whine/growl is typical of a hydrostat that has scored the pump/motor/center section. You are basically toast. May not be cost effective to repair or replace the transmission
 
Make sure you are not low on fluid, mine did something similar when it lost fluid due to a leak.
 
You can buy a rebuilding kit for it.
Cheap and very easy to do.
Comes with instructions.
 
Carscw said:
Look up the transaxle model number on eBay.
Click to expand...
Would that be the model number of the particular Sabre mower itself, or is there a separate model number stamped on the actual transaxle?
From my initial search on ebay I am only coming up with price tags of $300-$500 for a complete unit. Not finding any rebuild kits. Can you provide a link to one such example of a Sabre rebuild kit?
 
The tranny will have it's own model number tag on the housing. Most likely either hydrogear or tufftorq
 
You must log in or register to reply here.
Back
Top