Sx95 starting issue

C

Captncavmn

Member
I have a new battery and new filters I got and start and nothing I looked by the starter and found a purple wire with a little 90 degree plug on it like a boot do not know where it goes I think this is why my mower is not starting
 
So is the starter turning the engine or not?
if the starter isn't engaging at all, i would think it's the Trigger wire for the starter solenoid.
 
The set up looks similar to my RX75
This wire look like yours?
20210606-124108.jpg

20210606-124212.jpg
 
Keep in mind that the trigger wire may not go to the starter on your model, looking on the interweb, that uses a separate starter and solenoid. trigger wire goes to the solenoid.

1623006994006.pngThis yellow/gold starter (solenoid shift) has the solenoid mounted to it .



1623007036744.png1623007076060.png


while starters with a bendix drive use a separate solenoid
 

ARIMain - GREENPARTS

Buy Genuine OEM John Deere parts for your John Deere SX95 RIDING MOWER (12.5 H.P. ELECTRIC START) -PC2106 rx95 & sx95 starter: electrical and ship today! Huge in-stock inventory of OEM John Deere parts.
www.green-parts-direct.com www.green-parts-direct.com
what kind of connector does that 90° have in it, a flat blade or is it round?
kind of like the ends on these, 1623008396289.png
 
Captncavmn said:
No like the one you pictured before only smaller in size
Click to expand...
no what i'm asking is what does the inside of that connector look like.. that may help determine to what, or where it plugs to. if it's flat blade on the inside, or if it's round.
post up some pictures of the starter, and solenoid as well as the wire when you can,.

I'm trying to track down a wiring diagram too.
 
You must log in or register to reply here.
Back
Top