sapponetta
Forum Newbie
- Joined
- Oct 26, 2023
- Threads
- 1
- Messages
- 5
Hello,
I work for a landscaping company that specializes in high end work, natural scapes, Japanese gardens etc. All the mechanical and equipment maintenance falls on me. From gas trimmers to cats.
I have a km90t, has compression. Leakdown checks
Fuel lines are clear and delivering fuel to the carb. Has a very small pin hole in lower line that will only dribble if you press it a certain way. Probably came from me removing the lines a half dozen times.
Has stong spark.
Fresh valve adjustment (it's a 4mix)
It will start sometimes for a split second if you've been like turning it upside down, on its side etc and then immediately stall.
Will not start on starter fluid.
No issues with tank venting
I'm completely stumped.
I work for a landscaping company that specializes in high end work, natural scapes, Japanese gardens etc. All the mechanical and equipment maintenance falls on me. From gas trimmers to cats.
I have a km90t, has compression. Leakdown checks
Fuel lines are clear and delivering fuel to the carb. Has a very small pin hole in lower line that will only dribble if you press it a certain way. Probably came from me removing the lines a half dozen times.
Has stong spark.
Fresh valve adjustment (it's a 4mix)
It will start sometimes for a split second if you've been like turning it upside down, on its side etc and then immediately stall.
Will not start on starter fluid.
No issues with tank venting
I'm completely stumped.