stepping on the mower deck

[john6412]

i am getting older and it is getting harder to get on my t310 lawn tractor does anyone make a step to assist getting on without stepping on mower deck?

 

[breagler]

Afternoon John,
There are a few support handles on the market, just search for "Support bars for zero turn mowers" like the one below.

 

[tom3]

Those decks are pretty stout, put a 2" block under it, put it down on low on the block, climb on, raise the deck up, drive over the block.

 

[Born2Mow]

Those decks are pretty stout...

My Exmark actually has a tread plate on the deck where they want you to step.

 

[john6412]

Afternoon John,
There are a few support handles on the market, just search for "Support bars for zero turn mowers" like the one below.

thank you sir

 

[john6412]

Those decks are pretty stout, put a 2" block under it, put it down on low on the block, climb on, raise the deck up, drive over the block.

thank you sir

 

[john6412]

My Exmark actually has a tread plate on the deck where they want you to step.

thank you sir

 

[tscovill]

I usually put the deck to its lowest setting and step on it

 

[bkeller500]

If you lower the deck all the way down is it resting on the anti-scalp wheels? Wouldn't that be enough?

 

[7394]

Not necessarily, my anti-scalp wheels are still off the ground at lowest deck setting..