Export thread

There is a bar at the rear of my zero turn. Is there any reason that I couldn't sleep and anything up on its rear? It would make it easy to change the blades and clean underneath the deck.

snapper riders(or at least mine was) are designed to do that.. but the oil fill tube is in the back of the mower to allow it.

This is a gravely zt 34 if it makes any difference

Then I would look at your owners manual, it will state if it is possible to do it, if no mention then I would not.

Assuming that I cannot… What is the best way to get under there? Car ramps?

twoguyswithmowers said:

Assuming that I cannot… What is the best way to get under there? Car ramps?

Click to expand...

Or mower lift.

or put it on car ramps? then put a cinder block behind a wheel just encase it doesnt roll back on you.

In our shop we just put a car jack under the front of the deck and raise it up. Do it everyday with no problems.

Couldn't find anything in the manual so I emailed gravely. They said do not stand it up on its rear

The Mojack EZ. You can get one at Tractor Supply right now for $99

http://www.tractorsupply.com/en/stor...t?cm_vc=-10005

Ric said:

The Mojack EZ. You can get one at Tractor Supply right now for $99

http://www.tractorsupply.com/en/stor...t?cm_vc=-10005

Click to expand...

alot of people hang their tractor up with a tow rope connected to the rafters of the ceiling in their garage. ive never done it, ive always used ramps or a jack and jack stands. just an idea

Ric said:

The Mojack EZ. You can get one at Tractor Supply right now for $99

http://www.tractorsupply.com/en/stor...t?cm_vc=-10005

Click to expand...

Were I not have replaced my Snapper with one that does not need a jack... (the deck slides out) I would have bought this. That being said I used my floor jack all the time to raise my snapper up to change the blades etc...

Ric said:

The Mojack EZ. You can get one at Tractor Supply right now for $99

http://www.tractorsupply.com/en/stor...t?cm_vc=-10005

Click to expand...

Or you can try this one from Harbor Freight for $99 (less with a 20% off coupon). I bought one, and it works very well and is pretty secure.. I looked at the MoJack also, but like the HF one better. It uses a foot operated hydraulic jack which takes just a few pumps to raise it. They both seem to be of equal quality and are rated for 300#'s.
Bruce

High Lift Riding Mower / ATV Jack

metz12 said:

alot of people hang their tractor up with a tow rope connected to the rafters of the ceiling in their garage. ive never done it, ive always used ramps or a jack and jack stands. just an idea

Click to expand...

Just make sure it's a safe way! :confused3:

lawn mower fanatic said:

Just make sure it's a safe way! :confused3:

<img src="http://www.lawnmowerforum.com/attachment.php?attachmentid=16212"/> <img src="http://www.lawnmowerforum.com/attachment.php?attachmentid=16213"/>

Click to expand...

Oh sweet jesus I hope they lived!

ive worked on mowers like in the seccond picture and i lived!

exotion said:

Oh sweet jesus I hope they lived!

Click to expand...

Exotion,
Even this early in the morning, you always crack me up. I was thinking the same thing..:laughing:
Bruce