Springs for my MTD mower

[Pctriple]

Hi all thanks for sporting me to the forum. I'm after the spring configuration for my MDT mower looks like it's missing 3 small springs,here is some info of the mower it's self
MTD backline BL4046
11C-J10G683
CD221T2142
Fuel tank 11 0221 51 93618
Engine family BBSXS.1581VG
Briggs&Stratton 450 series 148cc

Any help in keeping this running would be a massive help.
Many thanks
Paul

 

[Rivets]

First, please check that you have the correct model number posted for your mower. I can’t find a 11C-J10G683 model. Second, may I ask what springs you think you are missing? Is it mower or engine? Third, if it is engine, please post engine numbers or a picture of the QR code box on the engine. You must realize that we aren’t standing next to you to see what you are talking about.

 

[StarTech]

Valid model number for the frame
11C-J10G683

Engine is a 09T502-2037-B1 per serial number given.

 

[Pctriple]

Thanks for your reply. I'll have a look and upload some pictures. The spring are off the plastic carburettor and a control lever close to the inlet port. There should be three small springs but I can't find anything anywhere regarding parts

 

[Pctriple]

Having trouble posting picture atm . The springs are linked to the carb' 2 for the throttle and 1 for the ignition advance level also linked to the carb'
Is there a online parts catalogue so I can see if I can get the arrangement correct.
Thanks

 

[Pctriple]

 

[Pctriple]

 

[StarTech]

There is only two springs and a linkage rod.

201 690347 LINK, Air Vane
209 690254 SPRING, Governor
211 691859 SPRING, Governed Idle

 

[Pctriple]

 

[Pctriple]

There is only two springs and a linkage rod.
View attachment 52450
201 690347 LINK, Air Vane
209 690254 SPRING, Governor
211 691859 SPRING, Governed Idle

Now that looks like I can get some where to possible start and finish my job..
Many thanks buddy