Export thread

solinod or starter.

#1

D

dwint

took some cables to the terminals from my truck to the cables on posts to solenoid.barley spun but when I took the plug out it spun good.the syarter is engageing.could I have a weak solinoid


#2

K

KennyV

You likely have valves out of adjustment...
Watch this YouTube to see the problem... : https://www.youtube.com/watch?v=0cWoEk5Guos
Watch this one to see how to adjust the valves...: https://www.youtube.com/watch?v=PbYbSKN4CxI
Easy fix... :smile:KennyV


#3

D

dwint

the mower was givin to me and he said it was running.isnt there a easier way to find the problem before I do the valves?


#4

R

Rivets

DWINT----Get in line because you are going to get really mad at me. I'm not a moderator or administer on this form, just a memberwho likes to help out, but you have finally got to me. You keep posting quess on how to rebuild or repair your unit. The problem I have with you is that you don't listen to the answers you are given and assume that the poster is leading you in the wrong direction. You never try the suggestions and when no one answers you start another thread. "WHERE DO THE BLACK AND RED WIRES GO????". I've seen this to often. If you want help, then you at least have to try the suggestions. I'll probably get a nasty note for posting this, but if they don't like this pull my membership. Rivets


#5

D

dwint

when someone gives you a mower you didn't take apart its not easy.i have fixed many mowers but electrical is my weak point.i gave out my model number and I still get no answers so yes I keep putting up posts.obviously ill have to go on another site.im getting answers like get a manual.thats not going to help me cause I don't have any ignition or safety switches.i just need a simple wiring to start it and charge it.


#6

Carscw

Carscw

If you hook jumper cables up and it still spins over slow then ADJUST THE VALVES

Nothing makes me more pissed off then someone that asks for help then acts like they know more than you

(( racing is the only sport that you need two balls ))


#7

B

Buckshot 1

Rivets said:
DWINT----Get in line because you are going to get really mad at me. I'm not a moderator or administer on this form, just a memberwho likes to help out, but you have finally got to me. You keep posting quess on how to rebuild or repair your unit. The problem I have with you is that you don't listen to the answers you are given and assume that the poster is leading you in the wrong direction. You never try the suggestions and when no one answers you start another thread. "WHERE DO THE BLACK AND RED WIRES GO????". I've seen this to often. If you want help, then you at least have to try the suggestions. I'll probably get a nasty note for posting this, but if they don't like this pull my membership. Rivets
Click to expand...

:thumbsup: Very well stated.


#8

Carscw

Carscw

Rivets said:
DWINT----Get in line because you are going to get really mad at me. I'm not a moderator or administer on this form, just a memberwho likes to help out, but you have finally got to me. You keep posting quess on how to rebuild or repair your unit. The problem I have with you is that you don't listen to the answers you are given and assume that the poster is leading you in the wrong direction. You never try the suggestions and when no one answers you start another thread. "WHERE DO THE BLACK AND RED WIRES GO????". I've seen this to often. If you want help, then you at least have to try the suggestions. I'll probably get a nasty note for posting this, but if they don't like this pull my membership. Rivets
Click to expand...

Don't hold back tell him how you feel.

(( racing is the only sport that you need two balls ))


#9

B

Buckshot 1

dwint said:
when someone gives you a mower you didn't take apart its not easy.i have fixed many mowers but electrical is my weak point.i gave out my model number and I still get no answers so yes I keep putting up posts.obviously ill have to go on another site.im getting answers like get a manual.thats not going to help me cause I don't have any ignition or safety switches.i just need a simple wiring to start it and charge it.
Click to expand...

What do you mean you get no answers? I gave you all the info you need to correct your problem under your post WHERE DO THe RED AND BLACK WIRES GO. As far as safety switches go, if the PO removed them, then he/she is a complete fool. If you removed them, then you are the complete fool. Safety switcheds are there for a purpose, SAFETY.


#10

B

Buckshot 1

Carscw said:
Don't hold back tell him how you feel.

(( racing is the only sport that you need two balls ))
Click to expand...

I think he just did that. Carscw, how the racing season been so far?


#11

Carscw

Carscw

Buckshot 1 said:
I think he just did that. Carscw, how the racing season been so far?
Click to expand...

Been going good won 3 but got DQed on one ( tires to soft ) yes I knew they was to soft
Still can not make a living at it LOL

(( racing is the only sport that you need two balls ))


#12

D

dwint

Buckshot 1 said:
What do you mean you get no answers? I gave you all the info you need to correct your problem under your post WHERE DO THe RED AND BLACK WIRES GO. As far as safety switches go, if the PO removed them, then he/she is a complete fool. If you removed them, then you are the complete fool. Safety switcheds are there for a purpose, SAFETY.
Click to expand...

I adjusted the valves and the same thing.intakes were at 7 and exhaust 9.i did them at 4 intake and 5 exhaust


#13

Carscw

Carscw

Take your jumper cables hook them to the truck

Hook the ground to a good spot on the mower now touch the pos to the post on the starter.

(( racing is the only sport that you need two balls ))


#14

D

dwint

that's exactly how I did it this time and when I hit that starter my truck rpm went down a lot and the jumpers got warm.brought the starter to a shop this morning .he said it works fine.there are some videos on you tube and the guy said when you get to top dead center to rotate the flywheel a quarter turn.that I didn't do or understand but I did check my adjustments three times.if you move the flywheel a quarter turn the piston goes back down so im not understanding whats going on


#15

Carscw

Carscw

Can you spin the engine over by hand with the spark plug in?

(( racing is the only sport that you need two balls ))


#16

D

dwint

yes you can.


#17

Carscw

Carscw

dwint said:
yes you can.
Click to expand...

Ok you hooked the starter to the jumper cables and it did nothing but make the cables hot.
I would replace the starter

(( racing is the only sport that you need two balls ))


#18

D

dwint

it tried to spin just like before I adjusted the valves.it didn't change when I adjusted the valves.was watching a you tube video and the guy says when you get to top dead center to move the flywheel a quarter turn which I didn't do


Footer Links 1

Top