so much confusion on Kawasaki oil filters.

Fastrak1972

Forum Newbie
Joined
Apr 21, 2022
Threads
4
Messages
9
the number on my filter that came on the mower (fastrak 60 kawasaki ft-730) is

49065-0721​

I do have more room for a much taller filter which I'd like to move to. There are so many confusing part numbers that "replace" other part numbers. Can anyone tell me a good "longer" oil filter to use for this Kawasaki ft-730 engine.
 

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
75
Messages
10,110
Briggs 491056 / Kohler 52 050 02 / Fram PH3614 / Stens 120-345 are four possibles. 3" OD 3" - 3-1/4" Height
 

Dunrollin

Forum Newbie
Joined
May 1, 2018
Threads
1
Messages
8
I saw something a few years ago on this subject and at that time someone recommended Fram PH3600 filters. I have been using them for the past 3 years and so far it has been good. Seems to be about double the capacity. This is on a Kawasaki FR691.

filter.jpg
 
Last edited:

7394

Lawn Addict
Joined
Sep 5, 2014
Threads
84
Messages
4,608
This is the replacement for the 49065-0721, it is almost 3 inches long. But is narrower on the O.D. But is said to hold same volume of oil. Anyhow, since mine is still under warranty, I will stick to Kaw filters.. (for now)..

GENUINE OEM KAWASAKI OIL FILTER PART # 49065-0724
REPLACES 49065-7010
REPLACES 49065-2078
CAN BE USED ON MOST ALL KAWASAKI ENGINES
CAN ALSO REPLACE 49065-7007



oil-filter (3).png
 
Last edited:

clubairth

Well-Known Member
Joined
Apr 6, 2015
Threads
3
Messages
130
Yes I have also added a longer and larger capacity filter. Here is what I found for my Kawasaki FR691V engine.
Factory called for #49065-7007

Wix 57035 2.3" long-This is the same length as the stock filter.
Wix 51056 2.7" long
Wix 51348 3.4" long
Wix 51516 4.8" long

Here is a picture of the #51516 installed. You can see it just touches the plastic fender but has caused no problems.
I also added a factory oil cooler.

Wix 51516 Install.jpg
.
.
.
 
Last edited:

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
75
Messages
10,110
Well that's your opinion. Just wait until the fender mounting points break sooner than they normally do.
 

clubairth

Well-Known Member
Joined
Apr 6, 2015
Threads
3
Messages
130
Actually they don't! Sometimes real life experience helps in situations like this!
.
.
.
 

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
75
Messages
10,110
Actually they don't! Sometimes real life experience helps in situations like this!
.
.
.
All I know if that mower came into my shop I would immediately inform the customer that I not responsiable for parts breakage related to changing oil or and other service work in that area.. I not paying for someone else's caused problems.
 

slomo

Lawn Addict
Joined
Jul 14, 2019
Threads
76
Messages
4,677
I'm all down for larger filters, when sensible, but when filters contact other parts, nah........

Those steel cans are not very thick to risk a sub 2 grand engine plus labor. Common sense should prevail here.
 
Top