G greg ray Forum Newbie Joined Apr 26, 2015 Messages 4 Apr 26, 2015 #1 My mower dies when the brake is released with the engine running. What is the problem? Help!
ILENGINE Lawn Royalty Community Leader Joined May 6, 2010 Messages 12,021 Apr 26, 2015 #2 Most common cause is a seat switch or associated wiring harness problem.
AnthemBassMan Well-Known Member Joined Apr 26, 2014 Messages 199 Apr 26, 2015 #3 Does it run just fine with the brake on? If it does, check the safety switch. Sent from my iPhone using LMF
Does it run just fine with the brake on? If it does, check the safety switch. Sent from my iPhone using LMF
T Tinkerer200 Well-Known Member Joined Mar 14, 2015 Messages 913 Apr 26, 2015 #4 IF you are needing to mow your yard, locate and disconnect the "kill" wire at the engine, mow your yard then check safety switches one by one. Walt Conner
IF you are needing to mow your yard, locate and disconnect the "kill" wire at the engine, mow your yard then check safety switches one by one. Walt Conner
G greg ray Forum Newbie Joined Apr 26, 2015 Messages 4 Apr 26, 2015 #5 Where is the "kill wire" at the engine?