Good evening- My SCAG Turf Tiger (model STT61A-27KA, S/N 6763858) had a no start with well charged battery, so I jiggled the wires near the starter and voltage regulator and it started right up. Mowed a few hours and parked it. The next day, it repeated. When I looked at the connector directly below the voltage regulator, it had disintegrated (apparently sun/age damage) and most of the wires were dangling. I can determine the wire location for the SCAG side of the terminal from the schematic, but I don't have a clue which wires tie in from the engine side. Any ideas where to find this information? 27 HP Kawasaki water cooled. Thanks!