Scag Tiger Cat PTO

W

walkwr0200

Forum Newbie
Mowing today and the PTO switch would shut off, I could engage again and would cut maybe 30 seconds more and disengage again. Any ideas what would cause this.
 
I would test the Clutch for resistance with an OHM meter....there is a spec resistance number, it will tell you if the clutch is good or bad!
 
Adjust the clutch to 0.015" at all three ports. If that doesn't resolve it, most like a bad PTO switch. The new style PTO switch kit is a major improvement over the old.
 
You must log in or register to reply here.
Back
Top