Replace coil old poulan blower

[1967]

Long shot, pictures to big to upload.
Old blower, pbv200le 711848. Believe it's type 1.

No spark, want to replace coil. Taken all apart down to removing nut on top of pull cord assembly casing . This is connected to crankshaft. How do I go about it? Is it a puller? Cord in plug hole to stop piston from moving and go counter clock wise? 1/2 in socket fit on it.
Don't want to break anything....
Thanks in advance .

 

[1967]

Made mistake in original post. It's 11/16 socket that fits.

 

[StarTech]

Are you referring to this one?

If so it just slides off and on.

 

[1967]

Are you referring to this one?
View attachment 69955
If so it just slides off and on.

Sorry, no
Here is my phone, send quick message and will send you pic of it. It's the part under it, bolted to the shaft itself. 9199861223

 

[StarTech]

No way to text here.

 

[1967]

I know, wasn't thinking. Saw that part chart, but don't seem to show the piece I'm talking about. Will see if can get app to compress picture/ change settings and get back to y'all.
Thanks.

 

[StarTech]

Just think how I feel that it seems everybody is demanding my cell number which I can't because I have no cell phone beside they don't work very here anyways. Even with a tower in sight my customers can't use their phones here.

 

[1967]

Just think how I feel that it seems everybody is demanding my cell number which I can't because I have no cell phone beside they don't work very here anyways. Even with a tower in sight my customers can't use their phones here.

All good, will find a way.