Repair

[cambre]

My clutch on ZTS 7500 quit working all of a sudden. Wiring seems good. I had a belt come off and clutch would not work after I put belt back on. I understand there is only one fuse on mower and if it starts fuse is OK. Thanks for any help.

 

[reynoldston]

Find a wiring diagram. Just too many wires and switches to work without a wiring diagram.

 

[mechanic mark]

craftsman 7500 craftsman zts 7500 | SearsPartsDirect Second manual down check air gap at pto clutch page 22. Also page 31 fourth manual down. Electrical diagram in parts section.

 

[joeyblazek]

You can also check to see if the belt damaged the plug on the clutch.

 

[mechanic mark]

Manual Craftsman Zero-turn rear engine rider 10727790 | SearsPartsDirect

 

[cambre]

Thanks Mark: The electric motor that raises & lowers deck fried & fused wire harness together. I rewired everything & all works well except electric motor witch cost $200 if anyone interested.

 

[cambre]

Find a wiring diagram. Just too many wires and switches to work without a wiring diagram.

Thanks reynoldston: I rewired & all works fine.

 

[cambre]

You can also check to see if the belt damaged the plug on the clutch.

Thanks joeyblazek: That wire wire OK.

 

[motoman]

mechanic mark, Just for my curiosity, what air gap? Thanks

 

[mechanic mark]

mechanic mark, Just for my curiosity, what air gap? Thanks

at PTO clutch itself,Fixing Electric Clutches

https://www.google.com/webhp?source...v=2&ie=UTF-8#q=how to troubleshoot pto clutch watch videos