procut 61 questions

blaroche

Forum Newbie
Joined
Dec 29, 2019
Threads
1
Messages
2
I purchased used, procut 61' ( PN 5900533) with Kawasaki engine.
I'd like to disengage the hydraulic pump and remove the deck to treat any rust each winter.

I've got the owners manual and setup guide, the setup guide shows deck assembly and disengaging the pump. It shouldn't be too hard to reverse deck assembly, but the hydraulic pump instructions (push the rider by hand) and image aren't very clear. I'm pretty sure I found the hydraulic release value, but accessing seems very difficult. I almost feel i need to remove stuff to get to it.

Anyone know of additional resources or have tips to disengage the hydraulic pump and deck removal?

Thanks
 

blaroche

Forum Newbie
Joined
Dec 29, 2019
Threads
1
Messages
2

have your model & serial numbers handy

Thanks, I've been there and saved all the manuals. The owners manual and setup guide have the same instructions for disengaging the pump. I'm pretty sure I found the value, but it seems appears I need to remove the hydraulic pump guard to access the value. Seems like a lot of overhead just disengage the pump to push or tow out of a wet spot.

Was hoping someone had better insight than I got out of the manuals or tips.
 
Top