Homeby5
Forum Newbie
- Joined
- May 21, 2020
- Threads
- 1
- Messages
- 1
I use my Stihl blower everyday. It ran perfect until I changed the primer bulb. As soon as I changed the bulb....my blower will start but not continue to run. I know the electircal is good because it will run when I spray starting fluid down the throat. It has to be something I did when changing the bulb because as I said....it ran perfectly. I have performed/cleaned checked the following:
Disassembled and cleaned the carb
Fuel filter
Spark arrestor
Check both fuel lines (return and supply) for clogs
Question: When you disassemble the carb and blow through the fuel return nipple...the one that goes to the plastic housing that the bulb mounts to.....it has a strong resistance. It also has a strong resistance to vacuum. Is this OK? The fuel supply offers no resistance.
Thanks guys
Disassembled and cleaned the carb
Fuel filter
Spark arrestor
Check both fuel lines (return and supply) for clogs
Question: When you disassemble the carb and blow through the fuel return nipple...the one that goes to the plastic housing that the bulb mounts to.....it has a strong resistance. It also has a strong resistance to vacuum. Is this OK? The fuel supply offers no resistance.
Thanks guys