Daleonline
Forum Newbie
- Joined
- Mar 2, 2021
- Threads
- 1
- Messages
- 3
I have a Poulan Pro model PR25PH48ST(A). 25 HP 48" deck. It has never been fast and now it hardly moves. This is the model w/ 2 pedals; one for forward and one for reverse. Both pedals bottom out when fully depress and it still barely moves. It goes slightly in reverse and if I pull up on the forward pedal, it goes slightly faster.
Replaced the drive belt, no change.
I was thinking the linkages could be worn/loose.
When I checked the tranny fluid at the plug, not only was it milky, but it was almost to the top.
Obviously, there is water in the fluid. Cannot locate a drain plug, don't think there is one. So it looks like I will have to remove it and turn it upside down to drain it.
Question is: What type of fluid/oil does it take and how much?
Or is it just trashed?
Thanks
Replaced the drive belt, no change.
I was thinking the linkages could be worn/loose.
When I checked the tranny fluid at the plug, not only was it milky, but it was almost to the top.
Obviously, there is water in the fluid. Cannot locate a drain plug, don't think there is one. So it looks like I will have to remove it and turn it upside down to drain it.
Question is: What type of fluid/oil does it take and how much?
Or is it just trashed?
Thanks