Poulan Pro 220

Walbro WT-625 was cleaned and rebuilt.
It will be going on my PP 220 tomorrow, hopefully.
New fuel lines and filter have been installed.
The Ruixing kit did not come with a new bulb. The old one is in good shape. I'll get a new one and be safe.
 
Update:
The Walbro carb is rebuilt. New fuel lines and spark plug. I pulled and pulled and pulled. No start. I pulled the plug and checked for spark. No spark. 🤬🤬
A new coil is $72 plus tax and shipping.
Many of the plastic mounting points are stripped. After further evaluation, I have decided to replace it. It's 17 years old and parts are getting harder to find. Some are unavailable.
Now, I have to find one of similar power and a 16" bar.
 
A piece of advice when working Plastite screws. When installing always turn them as if you are removing them until they jump/drop into the threads then tighten. This way you are not cutting news threads which leads to failure of the threads.

And there are some aftermarket coils on eBay under $20.
 
You must log in or register to reply here.
Back
Top