Parts for old mower engine

lavatan

Member
Joined
Mar 4, 2021
Threads
3
Messages
26
Hello,

The B&S engine on my Swisher Big Mow seized last year. I would like to get the engine rebuilt as the mower has sentimental value to me. I can find most parts except for the most important ones. I can't find the crankshaft, counterweight or cylinder assembly. I will list the model and part numbers below. If someone has any idea how to get these parts NOS or otherwise I would be extremely grateful. I have tried two different online sources and both times I've received notices that these parts were not available from their warehouse or their supply chain.

Engine Model:
195707-0431-E1
Parts:
Crankshaft 495629
Counterweight 690619
Cylinder Assy 495726

Thanks in advance.

Edit: The date code on the engine says its from 1996: 961015YD
 
Last edited:

Craftsman Garage

Well-Known Member
Joined
May 2, 2021
Threads
34
Messages
478
Why do you need a new cylinder, counterweight, and crankshaft? Unless they are damaged or out of spec, you should reuse these parts. No reason to replace them.
 

lavatan

Member
Joined
Mar 4, 2021
Threads
3
Messages
26
There is so much gouging and galling in the cylinder walls, crank journal and connection rod that it's not feasible to reuse the parts.
 

lavatan

Member
Joined
Mar 4, 2021
Threads
3
Messages
26
I should also say that the con rod and counterweight shattered when the engine seized.
 

Rivets

Lawn Royalty
Joined
Mar 11, 2012
Threads
59
Messages
15,305
Do you have any small engine boneyards with 100 miles? If you do you may find a few scav engines which you can frankenbuild into one good unit. If not what about shops in your area who take trade ins or allow people to dispose of used equipment. When I was teaching my students, who were short on $$$ would scavenge these sites and most times found what they wanted. I was lucky and had a boneyard 80 miles away and have become friends with the owner to when I’m allow free access to the property. Just a thought.
 

lavatan

Member
Joined
Mar 4, 2021
Threads
3
Messages
26
Do you have any small engine boneyards with 100 miles? If you do you may find a few scav engines which you can frankenbuild into one good unit. If not what about shops in your area who take trade ins or allow people to dispose of used equipment. When I was teaching my students, who were short on $$$ would scavenge these sites and most times found what they wanted. I was lucky and had a boneyard 80 miles away and have become friends with the owner to when I’m allow free access to the property. Just a thought.
I will definitely take this into consideration and send out some feelers. I'm not aware of any small engine salvage yards near me but I've never really looked either. Thanks for the suggestion.
 

Tiger Small Engine

Lawn Addict
Joined
Dec 7, 2022
Threads
2
Messages
1,107
I will definitely take this into consideration and send out some feelers. I'm not aware of any small engine salvage yards near me but I've never really looked either. Thanks for the suggestion.
Did the engine run low, or out of oil? If the piston, rings, cylinder, crankshaft, and cam are all heavily scored, most likely this engine is not able to be rebuilt.
 

lavatan

Member
Joined
Mar 4, 2021
Threads
3
Messages
26
I have a replacement piston/rings. In this engine the cylinder is part of the sump and comes as one assembly. I didn't think it would be that hard to find these parts but I suppose with the engine being almost 30 years old is problematic.
 

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
91
Messages
11,492
The problem is that Briggs filed bankruptcy and was brought by a financial investment that is killing off all the slow moving items. And jack the prices on every thing Briggs sells.
 
Top