I have a friend that brought me a Partner K650 mark II stump grinder to work on. I got it fixed but cannot find the correct air filter. He brought a part number some shop gave him which is 505315571. The model on the machine is 2480405. I found some on amazon that say k650 but not mark II but active II & III. And they all say concrete saws. Do these take the same filter? Any help would be appreciated as he needs one asap. Ps. This is not the pre-cleaner that he needs, but the main paper pleated one.
Partner k650 mark II stump grinder
- Thread starter Ckn087
- Start date
- Joined
- Sep 24, 2017
- Threads
- 265
- Messages
- 6,618
Amazon.com: (2) New AIR FILTER SET / KIT Partner K650 / K700 Active II & III Concrete Saws by The ROP Shop
Amazon.com: (2) New AIR FILTER SET / KIT Partner K650 / K700 Active II & III Concrete Saws by The ROP Shop
www.amazon.com
- Joined
- Sep 24, 2017
- Threads
- 265
- Messages
- 6,618
Yes, it says it fits partner As well as other equipment, the concrete saws.
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 65
- Messages
- 24,995
The K650 is the just the engine and that engine will be used on a lot of different items .
Lots of very heavy load application will use that engine which is essentially a chain saw engine.
So you will see it on a chain saw ,concrete saw, stump grinder. metal saw, demolition saw etc etc.
All just variations on the basic theme of a chain saw with an extended arm that has a blade hanging off the end of it
Lots of very heavy load application will use that engine which is essentially a chain saw engine.
So you will see it on a chain saw ,concrete saw, stump grinder. metal saw, demolition saw etc etc.
All just variations on the basic theme of a chain saw with an extended arm that has a blade hanging off the end of it
Well that makes sense lol. He swears that filter is too small but I'll try it.