Old BR430 problem

upupandaway

Well-Known Member
Community Leader
Joined
Jul 3, 2015
Messages
644
I have a problem\question on the trigger. It starts but when i squeeze the trigger nothing happens.
I opened it and see a slot but nothing to catch the "ball" at the end of the cable.
Can someone post a diagram so I can see what is supposed to be pulling the cable when i squeeze the trigger??

TIA.
 
It looks like there were a couple variations. Which end are you talking about? Where it meets the carb?
1end.PNG2end.PNG
 
Thanks. My problem is in part 1. In the "candy cane" shape slot, the ball sits with plenty of slack. I tried lifting the end to hook the top of the "candy cane" but as soon as I slide the kill up, it pushes the ball out of the slot to just sit there and back to step 1 again.

So im not missing any part. GRRRRR. back to step 1.

Is the part u list updated? I don't know if the one u post has the candy cane slot on the back side.
 
Sorry, I put up the incorrect blowup.
Probably a bit of dislexia.

430.PNG
 
NO. the first diagram u posted is correct. I'll get a video when i get the chance.
 
Sorry for the delay but here is a video of my problem.
If I pull the cable with pliers, the throttle moves and it returns to idle when i let go of the cable.
trigger problem
 
Back
Top