Old BR430 problem

[upupandaway]

I have a problem\question on the trigger. It starts but when i squeeze the trigger nothing happens.
I opened it and see a slot but nothing to catch the "ball" at the end of the cable.
Can someone post a diagram so I can see what is supposed to be pulling the cable when i squeeze the trigger??

TIA.

 

[Fish]

It looks like there were a couple variations. Which end are you talking about? Where it meets the carb?

 

[Fish]

Is this yours?

 

[Fish]

Throttle Trigger for Stihl BR45C, SR340 Blowers - 4203 182 1003

Throttle trigger For Stihl Blowers Genuine Stihl Part OEM Part No. 4203 182 1003 Suitable for the following Stihl Machines: BR 45 C, SR 340, SR 420, BR 340, BR 340 L, BR 380, BR 420, BR 420 C

www.lsengineers.co.uk

 

[upupandaway]

Thanks. My problem is in part 1. In the "candy cane" shape slot, the ball sits with plenty of slack. I tried lifting the end to hook the top of the "candy cane" but as soon as I slide the kill up, it pushes the ball out of the slot to just sit there and back to step 1 again.

So im not missing any part. GRRRRR. back to step 1.

Is the part u list updated? I don't know if the one u post has the candy cane slot on the back side.

 

[Fish]

Sorry, I put up the incorrect blowup.
Probably a bit of dislexia.

 

[upupandaway]

NO. the first diagram u posted is correct. I'll get a video when i get the chance.

 

[upupandaway]

Sorry for the delay but here is a video of my problem.
If I pull the cable with pliers, the throttle moves and it returns to idle when i let go of the cable.
trigger problem

 

[Fish]

Let us put this up first.

 

[olgeezershonda]

Sorry for the delay but here is a video of my problem.
If I pull the cable with pliers, the throttle moves and it returns to idle when i let go of the cable.
trigger problem

Throttle cable binding a bit in the cable housing? A little silicone lube maybe?