Export thread

Need a Crankshaft

#1

T

tyson62792

Anyone have a crankshaft for a Kohler 17 HP Spec # 24363 or know where I can buy one


#2

ILENGINE

ILENGINE

Looks like your engine takes crankshaft part number 52 014 73, superceding to 52 142 03, superceded to 52 142 03-s, retail price $1070.77 How many do you want.


#3

M

mechanic mark

Post all numbers from your engine, thanks.


#4

reynoldston

reynoldston

I don't know what is wrong with your old crankshaft but, as I recall Kohler has rod inserts, your crank be reground with a oversize insert if that is the problem?


#5

T

tyson62792

I know Kohler makes .010 undersize rods I have not heard of inserts and am not familiar with them, is ths something Kohler has ? The problem with my crank is wear on the main bearing area. Still looking for a used crank don't want to spend $1000.00 for one, might try spray welding the crank and getting it turned back to spec if that isn't cost prohibitive. Never tried it before but I don't see why it wouldn't work unless someone out there does. Used Crank anyone ????


#6

reynoldston

reynoldston

tyson62792 said:
I know Kohler makes .010 undersize rods I have not heard of inserts and am not familiar with them, is ths something Kohler has ? The problem with my crank is wear on the main bearing area. Still looking for a used crank don't want to spend $1000.00 for one, might try spray welding the crank and getting it turned back to spec if that isn't cost prohibitive. Never tried it before but I don't see why it wouldn't work unless someone out there does. Used Crank anyone ????
Click to expand...

I don't know what Kohler you have, but the magnum has rod inserts or you can call them bearings. If you can get oversize rods your model doesn't have inserts. I have found machine shop work doesn't come cheap so yes used crank if you can find one, Might be a lot easier to find a used engine , something you can salvage a good crank from.


#7

M

motoman

Spraying got to be very expensive. I like salvage search idea if you can find a place. Sometimes ebay or craigslist?


#8

reynoldston

reynoldston

Have you looked into the spray welding, if a new crankshaft is over a 1000 dollars it sure has to be cheaper to repair the old crankshaft then replace it. I have never had a crank spray welded but have had them turned down.


#9

B

bertsmobile1

Get the crank ground down to suit a Corrillo custom con rod.
Corillo will make a rod , if they dont have hen as a std item for the mower racing / go cart crowd.
A custom rod should be around $ 200 -$ 300 mark
Off the shelf will be $ 100 - $ 200 region.
Crank regrind will be about $ 40


#10

reynoldston

reynoldston

bertsmobile1 said:
Get the crank ground down to suit a Corrillo custom con rod.
Corillo will make a rod , if they dont have hen as a std item for the mower racing / go cart crowd.
A custom rod should be around $ 200 -$ 300 mark
Off the shelf will be $ 100 - $ 200 region.
Crank regrind will be about $ 40
Click to expand...

Post #5 he said the mains were bad not the rods. Makes me wonder what the condition the case is in?


#11

B

bertsmobile1

reynoldston said:
Post #5 he said the mains were bad not the rods. Makes me wonder what the condition the case is in?
Click to expand...

Ooops.
Note to onself, reread the entire thread before posting replies.


Footer Links 1

Top