HarleyUltra
Forum Newbie
I have a zero turn MZ7227 zero turn from around 2010. I can't anywhere in the manual what the oil capacity of the hydraulic drive when doing an oil and filter change. Can any help me with this?
Thanks
Thanks
MZ zero turn hyd oil question
- Thread starter HarleyUltra
- Start date
bertsmobile1
Lawn Royalty
Not in the Husqvarna manual
Try the hydro makers manuals .
Try the hydro makers manuals .
HarleyUltra
Forum Newbie
Not sure. The info on the pump is: Tuff Torq by kanzaki MDL: DUP1 0S SN: 10S113601
It is not in the Husqvarna owners manual or parts manual.Was able to find this. Still does give capacity but close.
Place an oil drain pan with a two gallon
capacity beneath the oil filter. Remove the
oil filter from the pump.
2.
After the oil has drained, wipe the filter
base surface off and apply a film of new oil
to the gasket of the new replacement filter
Place an oil drain pan with a two gallon
capacity beneath the oil filter. Remove the
oil filter from the pump.
2.
After the oil has drained, wipe the filter
base surface off and apply a film of new oil
to the gasket of the new replacement filter