MTD/Yard machines 11A-544E29 governor linkage and springs placement ?

[SF1]

Hello everyone, does anyone have the MTD11A-544E29 ? I'm trying to fix this mower so I have a spare push mower, got everything going except the governor link and springs. Would anyone have a picture they could post, to show me how they go ? In the manuals for this and others that I have, there's always very little information on how everything should go, and unfortunately I always get confused , I've posted some pics to show you guys. I think the main governor spring is the only one that's hooked up right, as far as the smaller spring, I have no idea how its supposed to go and I'm not sure if I attached the steel link correctly either. Any help would be great, thank you

 

[bertsmobile1]

The carb end is in the wrong place.
It goes into the loop in the connecting wire

 

[SF1]

Hi, I'm not totally sure what you mean, I'm pretty new with linkages and springs on mowers, so I'm trying too teach myself, but I can't seem to find specific details on how it should be. Sorry for my inexperience. Thanks

 

[bertsmobile1]

In you photo
Take the spring out of the black plastic bit & put it int the loop in the piece of wire to the left

The spring is connected to the wire & only the wire is connected to the carb

 

[SF1]

Thanks a lot, I'll try it !