Motor acts like it is either staved for fuel or flooding out.

[Tombo1]

XT1 enduro series EFI LT 42, will start and run for just a little while then it acts like it is either staved for fuel or flooding out, it will eventually die.
I have cleaned the carburetor, and injector, and it’s getting good fuel to the carb. Any suggestions?

 

[ILENGINE]

If you have the MIL light is it flashing a code. If you have push button start does it display an E code. That would help give direction for your issue.

 

[Tombo1]

It shows a E4 code

 

[ILENGINE]

E4 is Oxygen sensor code. Which if it is cutting in and out could have an effect on the fuel ratio.

 

[Tombo1]

I will look into that Thanks