I was mowing and the motion drivebelt broke. I just replaced the belt thinking i'm gonna be good to go but no. it will not move. I can see the belt moving fine and when I lift up the rear end the tires are moving forward. the manual says to adjust the clutch which I just did (no help) and then the brake rod which I have not done yet, don't think that will help anything. any ideas? is my tranny toast? this is my first riding mower and I have 1+ acre yard.
model #536270112, 10hp 30inch. there is a key missing on one of the axels but I think is was missing before the belt snapped but i'm not 100% sure. how important is the key?
model #536270112, 10hp 30inch. there is a key missing on one of the axels but I think is was missing before the belt snapped but i'm not 100% sure. how important is the key?
The key I very important, it is what makes tire move without it have some one watch the axle and you will see it moving but tire is not, that could be your problem with tractor not moving with new belt.
The key I very important, it is what makes tire move without it have some one watch the axle and you will see it moving but tire is not, that could be your problem with tractor not moving with new belt.
yeah I can see how it works after looking at it. seems like it would still move some with one key. i'm going to go search my garage now for missing key. if that is the problem I will jump for joy! been mowing 1+ acre with a walk behind. great exercise but... thanksfor your reply.
yeah I can see how it works after looking at it. seems like it would still move some with one key. i'm going to go search my garage now for missing key. if that is the problem I will jump for joy! been mowing 1+ acre with a walk behind. great exercise but... thanksfor your reply.
Check inside the wheel, some times they stay in the wheel & some times they stay on the shaft.
New keys are only a few dollars so get one & when you find where yours got to put it in a sandwich bag with a name on it and keep it with your mower spares.
ok, this is kind of funny. I went in the garage and found the missing key from one of my rear axels thinking this will be a miracle if it works. it worked! lesson learned, both keys must be in place for mower to move. went to test it out and front tire was totally flat. would not take air at first until I took it off the rim and slowly inflated it. anybody know what these shop guys use to seal these tires? had a front tire that would not take air last year no matter how hard I tried, seal was broken I guess. anyway thank you guys for pointing me in the right direction. I am so happy to have my rider back!
I thank all you guys for your help. this forum was 100% helpful. this is FYI for anybody that has a mower similar to mine, craftsman 10/30. after the motion drive belt broke I jacked it up and couldn't figure out how to get the belt around the back pulley until I took off the back wheels. that gave me a much better perspective on it and allowed me to get the belt over the pulley so it could go on the pulley and I learned the brake/clutch pedal must be engaged to allow the belt to go on. I thought I had the wrong size belt until I pushed the clutch in that allowed the clearance to get the new belt on. I thank you all!
