Loose wire engine wont start

[mdmedicnj2022]

Engine wont start on 130G32 0125 F1. I think its the oil sensor wire but cant find other end. This end runs under the gas tank but not sure where i need to look for the other end and what replacement part if any I will need.

 

[Rivets]

That wire probably has no part of the non starting problem. You need to find out whether it has spark and/or fuel. Get an inline spark tester to check for spark. If you have spark, spray a small amount of carb cleaner into the cylinder and see if you can get it to pop. Let us know what you find.

 

[slomo]

Put your fingers on the wire. Follow it to the other end. Post a picture like you did here so we can see what you are working with.

 

[slomo]

Boy, tough crowd. OP ghosted us.

 

[Douglas Lee]

Sure did!
Doug Lee
*