Looking for new Push mower (Not self propel), with Honda engine, but must cut to 4" max

[7394]

Can't believe all the New no-frills "human powered" push mowers only cut to 3." or max @ 3.75"

When I find one that cuts @ 4 inch, it is self propelled.. Arrrgh.. And Side Discharge would be another "want".

Thanks in advance.

 

[Scrubcadet10]

Looked at Toro, but their actual Human pushed mowers with a 4" cut seem to only come with Briggs engines, or 1 comes with their own branded toro engine. there was 1 with a GCV160, but it maxxed out at 3.75 inches.

Commercial Mowers | Zero Turn, Stand-On & Walk-Behind Lawn Mowers | Toro

Discover Toro’s leading line of commercial lawn mowers with professional-grade features engineered to handle extreme conditions and challenging terrain.

www.toro.com

Lawn Mowers | Gas & Electric Lawn Mowers for Homeowners | Toro | Toro

Take charge of your lawn with the perfect Toro lawn mower - electric or gas - for your home and get performance you can count on.

www.toro.com

20" (51 cm) High Wheel Push Lawn Mower | Toro

The Toro 20” high wheel push lawn mower features a 140cc Briggs & Stratton OHV engine with bagging, mulching capabilities proven reliability and performance.

www.toro.com

 

[7394]

Thanks Scrub-

I get a kick outta the 2 that say Side Discharge: Optional, Guess that involves chopping a hole in side of deck & adding discharge chute.. But they do say max cut is 4 inch.. Leary of the B&S ohv engines tho...

I should just get that Honda® HRS 216 & add taller ball bearing wheels.

My Z is Toro/Kawasaki, & Been super for over 6 years, since I bought it new.

 

[tom3]

I was thinking the same thing. Get a set of 1 inch dia. bigger wheels, same size axle, and look for actual bearings. Usually not expensive.

 

[7394]

Tom- That may indeed be the easiest way.. Trying to find one at a dealership to make sure it has at least 5/8" extra space to accommodate taller wheels.

Everywhere I call says, as soon as they get some, they are sold. Which sounds good, but bad for my plans....

 

[7394]

Looking all over for 9 inch wheels w/wheel bearings.. Finally checked Home Depot, they have Honda OEM wheels that are 9" & w/Wheel bearings for $22. for 2 wheels.. Price is best I've found. This just might work..

 

[7394]

Then I check the Surplus Center & they have tons of wheels w/ball bearings. Only thing is, about every size except 9 inch.

And their prices are really low. I plan to contact them, & inquire where are they hiding the 9" ers..