Looking for engine dimensions

upupandaway

upupandaway

Well-Known Member
Joined
Jul 3, 2015
Threads
33
Messages
590
Anyone have a link to a diagram of the dimensions of where the bolt holes are for a Briggs 281707?
I'm playing and would like to know where to drill holes vs eyeballing it.
TIA.
 
smalltimerpm

smalltimerpm

Active Member
Joined
Feb 4, 2023
Threads
5
Messages
84
Can you just measure if you have the motor?
 
upupandaway

upupandaway

Well-Known Member
Joined
Jul 3, 2015
Threads
33
Messages
590
B

bertsmobile1

Lawn Royalty
Joined
Nov 29, 2014
Threads
64
Messages
24,705
upupandaway said:
I looked there already. Mine is not there but there is a 14hp so I guess it should be the same. Thx.
Click to expand...
Side valves & OHV engines have different bolt mounting patterns.
Singles & V twins have different bolt mounting patterns .
MTD , Murray , Noma ( others probably ) use a removable engine mounting plate
so if worse comes to worse you can get one of those from a mower wrecker
I might have one in the graveyard I will have a look latter today.
AFAIK all B&S ride on SV engines have the same mounting centres regardless of their stroke .
 
smalltimerpm

smalltimerpm

Active Member
Joined
Feb 4, 2023
Threads
5
Messages
84
upupandaway said:
Being the bottom of the engine is not flat, I know I would have a template that is off thus drill in the wrong places.
Click to expand...
Templates can easily be cut with cardboard and mounted to motor for reassurance it fits before placed
 
B

bertsmobile1

Lawn Royalty
Joined
Nov 29, 2014
Threads
64
Messages
24,705
Apart from the crankshaft & oil seal housing the bottom is flat as it has to sit on a flat plate
So cut a 4" hole in the middle and you can use a corn flake packet to make a template .
 
You must log in or register to reply here.

Footer Links 1

Top