Home

Export thread

Lawn Machine Mower need model number & Deck Problem

May 9, 2020#1

afees98

Hello, I am looking for a bit of help to identify a Lawn Machine by MDT. I am having an issue with the deck that, when am cutting an any kind of angle (like a hill), the deck bogs down, but the engines doesnt bog down. I haven't found anything on this issue yet on the internet.

By the pictures below, you can see that I did repaint from its original Dark Green color in order to clean up rust on the back end. I have already check all over the mower for a plate for the model number but it doesn't have one anyone. Didnt have one when I got it.

If anyone can idenify the mower with the pictures listed below, that would be great.

https://prnt.sc/sdvetb
https://prnt.sc/sdvf6r
https://prnt.sc/sdvfjb
https://prnt.sc/sdvfst
https://prnt.sc/sdvg1l

If you can't, I would greatly take help with the mower deck problem.

Thanks in advance!

May 9, 2020#2

ILENGINE

13AK695H352 may be a good possible. Or 13AQ695H352 is another one Assuming 46 inch deck and hydrostat transmission.

May 9, 2020#3

afees98

It is a 42in deck... Forgot to put that in the post.

May 9, 2020#4

ILENGINE

afees98 said:
It is a 42in deck... Forgot to put that in the post.

OK try 13AS695G352 as a possible. there are similar model of the 1997 model year but most would just be a cosmetic change depending on the last three digits of the model number depending who it was made for. I am assuming this was sold by Walmart, but others sold a similar model also.

May 9, 2020#5

afees98

Ok. Am not sure where it was sold at since I got for free from family member, and they got it from there neighbor

May 9, 2020#6

afees98

Looked up that model number, mine is a 3 blade deck...

May 9, 2020#7

B

bertsmobile1

To quote our most embarrasing pollie down here. "please explainee"
Bogs down ?

May 9, 2020#8

ILENGINE

afees98 said:
Looked up that model number, mine is a 3 blade deck...

Are you sure it isn't a 46 inch deck The pictures look more like a 46 than a 42

May 9, 2020#9

Fish

Raise the seat up and look on the bottom of it for a tag.

May 9, 2020#10

afees98

bertsmobile1 said:
To quote our most embarrasing pollie down here. "please explainee"
Bogs down ?

Like I stated in my post, The deck bogs down when on a slight hill causing the mower to be at a angle. The engine isnt bogging, its just the deck.

ILENGINE said:
Are you sure it isn't a 46 inch deck The pictures look more like a 46 than a 42

I will have to check tomorrow, its a 3 blade deck.

Fish said:
Raise the seat up and look on the bottom of it for a tag.

I have already looked everywhere on that mower for a tag, it is not there (Or I wouldnt be asking lmao).

May 9, 2020#11

Fish

Give us the numbers off of the throttle and choke cables, and the numbers off of the tag on the transmission.

May 9, 2020#12

afees98

Fish said:
Give us the numbers off of the throttle and choke cables, and the numbers off of the tag on the transmission.

I will have to get that tomorrow, as long as they are still on the cables.

May 10, 2020#13

Fish

They are in the pics, just not able to read them.. The should be a number like: 746-xxxx or something like that. They won't tell us much but will help you run it down a little. The number on the trans would probably be more useful.

May 10, 2020#14

afees98

The numbers off the cable is 746 0634 76967

May 11, 2020#15

Fish

Yeah, The numbers off of the cables are not really very helpful, my bad. But the transmission would narrow your model choices way down. Find the numbers and enter that here: