weedwarrior
Forum Newbie
- Joined
- Aug 14, 2020
- Threads
- 1
- Messages
- 5
Weekend warrior semi mechanic- question for anyone. My valve bent and caused my piston to jam up blow into pieces. I have gotten it apart and ordered a new piston with rings and new valves. During the piston Explosion it gauged the cylinder walls in a few places, some came out when honing it but one major one is still there. I’m not sure if I can continue to deglaze it down till it’s smooth, leave it be or try to Fill it in with a little JB weld And smooth it out? Not sure.