John Deere riding mower

Timber Wolf

Forum Newbie
Joined
Oct 7, 2024
Threads
1
Messages
2
I have a 190 John Deere,no spark on the solenoid,no click when I turn the key to start,new battery. I was mowing and just stopped Please Help Me
 

Rivets

Lawn Royalty
Joined
Mar 11, 2012
Threads
59
Messages
15,305
Check to see if the battery cables are clean and tight at both ends. Especially the negative to chassis.
 

Timber Wolf

Forum Newbie
Joined
Oct 7, 2024
Threads
1
Messages
2
Test the battery at an auto parts store. New doesn't mean new.

Engine stopping is no spark or fuel. You are lacking one or both.
I put a meter on the battery and it is good,it makes me think it's a safety switch. I have looking at YouTube trying resolve my problem, but there is no current going to the siliniod
 

slomo

Lawn Pro
Joined
Jul 14, 2019
Threads
78
Messages
5,081
I put a meter on the battery and it is good
All batteries and electrical circuits need LOAD TESTED. Putting a meter on a battery with a dead cell means zero. Oh I see 12 volts means nothing.
 

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
91
Messages
11,473
Should be a LT190. IF so you could have blown the fuse link. Check for battery voltage at the "B" terminal of the ignition switch.

It would not hurt the PTO field winding resistance if below 1.7 ohms then it is partially shorted which the PTO clutch would need replacing. But tests are in order first.
 
Top