JOHN DEERE LA155 MOWER DRIVE BELT NOT STAYING ON

S

Sheldon

Forum Newbie
Hi

the mower drive belt on our JOHN DEERE LA155 keeps coming off

the belt seems fine, all the bearings spin free & the idler spring etc is all working OK

we are mowing pretty dense overgrowth on uneven ground so the mower is working hard & bouncing around

any suggestions would be appreciated

Thanks!
Sheldon
 
The belt has keepers at the front & back to prevent it jumping off which some times actually work.
If the belt has jumped off a few times then the belt will be damaged so you will need to replace it.
Check the belt for damage and if you find some post photos of it .

Usually it will either be some debris stuck in one of the pulleys or a bad pulley bearing that throws the belt.
 
You must log in or register to reply here.
Back
Top