john deere 757 ztrak

ACF

Active Member
Joined
Jun 16, 2017
Threads
28
Messages
89
had this jd ztrak 25 hp 60 inch deck running,and stopping several times to test safety switches , stopped engine went to restart does nothing, the pto will engage could i have a start relay have gone bad. any cooments will be helpful

thank you
 

ACF

Active Member
Joined
Jun 16, 2017
Threads
28
Messages
89
thanks jump across soleniod and sounded like starter did not engage could this be problem
finally completed the wiring checks found not broken wires and all safety switches are working properly, got it to turn over, but have a new problem when the key switch gets to the run position the engine try's to start vice waiting till it gets to the start position on the key switch and the starter solenoid continues to push starter shaft up onto the flywheel

any ssuggestion would be great
ac
 

Kenbu

Forum Newbie
Joined
Apr 29, 2016
Threads
2
Messages
4
Could you have the start and run wires on the key switch shorted or reversed? If the wiring is OK, then you may need a new key switch.

Ken
 

Tiger Small Engine

Lawn Addict
Joined
Dec 7, 2022
Threads
2
Messages
1,061
finally completed the wiring checks found not broken wires and all safety switches are working properly, got it to turn over, but have a new problem when the key switch gets to the run position the engine try's to start vice waiting till it gets to the start position on the key switch and the starter solenoid continues to push starter shaft up onto the flywheel

any ssuggestion would be great
ac
New key switch.
 

ACF

Active Member
Joined
Jun 16, 2017
Threads
28
Messages
89
owner tells me that he had to replace 2 starters and had the key switch replaced, not sure if key is oem or aftermarket
 
Top