Took a while to post. Anyway I have a 15 year old Honda HRB215 HX with a hydrostatic transmission. So after last years issue of poor drive performance and reading several blogs I decide I had nothing to lose and took the drive out and apart. This all went well, the axial shaft was worn , inner clip groves were worn, did a JB weld on axle then drilled axle and used a roll pin for clip. This worked. Now the hard part is finding a replacement cable for drive speed control. Local dealer could not find it and the drawings on web sites have different cable end. So if a anyone knows where I could get one of these that would be great Cable length end to end = 46.75 inches
jasski

jasski
