Is leaking governor seal related to engine surging?

K2Creates

Forum Newbie
Joined
Jul 16, 2022
Threads
1
Messages
1
I have an Exmark Turf Tracer with a Kawasaki FS481V engine and it's got a few problems. One of which is surging at low speeds (I cleaned carb jets carefully and it didn't fix it). Another is the governor seal is leaking oil. Are they related? I'm working to fix the leak and I'm wondering if it will also affect the other issue. Thanks for the help!
 

bertsmobile1

Lawn Royalty
Joined
Nov 29, 2014
Threads
65
Messages
24,995
Not normally
Did you remove the idle jet and clean it out mechanically then back flush the idle air passages ?
 

hlw49

Lawn Addict
Joined
Jul 11, 2021
Threads
43
Messages
1,607
Hold the gov. so the engine idles and see if it dies. If not gov. problem. If it dies carb. problem. Is the idle speed set to the proper rpms. If not could cause the problem.
 

txmowman

Well-Known Member
Joined
Oct 8, 2018
Threads
1
Messages
287
Does applying choke tend to help smooth out the surge? If so, check to see if there is a Welch plug missing from the top of the carburetor body.
 
Top