I have a Hustler Sport 48" ZTR with a 21 HP Briggs and Stratton engine. I noticed after mowing I had a bad oil leak coming from the oil pump to the carburetor. I inspected the line and saw no tears or holes so I thought it was the oil pump. I bought an OEM oil pump and installed it. The next time I mowed it was leaking again. I will say that when the mower is not engaged and just idling I don't see any leaks but after I engage the PTO oil starts to drip from the line that goes from the pump to the carb. I replaced the clamp on the pump with a hose clamp to make sure the old one wasn't too lose. Could the line have a pin hole or something? I did take it off and checked by putting an air hose in it and listening for any air. Any help would be appreciated.