Hydrolic hoses

C

cambre

Well-Known Member
I took the two swing cylinders off of my Kubota L35 backhoe about 4 months ago and did not take pictures (stupidity on my part). Can anyone post a drawing of how the 4 hose go back on? Many thanks to anyone who helps me on this.
 
Might be able to rough install them to see how the hoses are bent and the reach of each hose?? Kind of hang one hose up there and see how it fits? Like installing spark plug wires in custom lengths. Ever put plug wires on a straight 6 engine?

slomo
 
slomo said:
Might be able to rough install them to see how the hoses are bent and the reach of each hose?? Kind of hang one hose up there and see how it fits? Like installing spark plug wires in custom lengths. Ever put plug wires on a straight 6 engine?

slomo
Click to expand...
yes I have
 
Hopefully you get the hoses mounted in the proper oil in and out flow. Download your manual or call your Kubota dealer.

slomo
 
On swing cylinders, I suspect that the top of one cylinder is connected to the bottom of the other because you're pushing with one and pulling with the other.Annotation 2020-07-31 085601.jpg
 
Last edited:
cpurvis said:
On swing cylinders, I suspect that the top of one cylinder is connected to the bottom of the other because you're pushing with one and pulling with the other.View attachment 53470
Click to expand...
cpurvis said:
On swing cylinders, I suspect that the top of one cylinder is connected to the bottom of the other because you're pushing with one and pulling with the other.View attachment 53470
Click to expand...
Looking at the picture the left cylinder has 3 fittings, I have 2 hoses for 2 of them, at a loss to what goes on 3rd one. Thanks Mr. Purvis. I will make a drawing showing the fittings, I will have to get my neighbor to show me how to post it.
 
Last edited:
You must log in or register to reply here.
Back
Top