I have a gx620 on my Hustler. It's over 20 years old. It started a oil leak this spring. With mowing season over I want to take care of it. My question is, seeing that the gx620 is no longer available, should I try to find a replacement engine or have the present engine repaired. I see there is a gx630 but not sure if it would be a direct fit. Any advice is appreciated.
ILENGINE
Lawn Royalty
- Joined
- May 6, 2010
- Threads
- 44
- Messages
- 10,774
Going from the old GX twin series to the new GX twin series is a little more complicated due to Honda doing a redesign a few years back. The ignition when from a open to run to closed to run which means the ignition modules have to be grounded to spark, which requires a different key switch and other wiring changes. Also they changed the engine design and when to a semi-hemi style head which resulted in the exhaust mounting studs being at a different angle then the old engine.
Tiger Small Engine
Lawn Addict
- Joined
- Dec 7, 2022
- Threads
- 2
- Messages
- 1,130
I have only seen a larger twin Honda on one zero turn, and it was a Hustler. Unless the engine is leaking a lot of oil, I would just keep the oil checked and topped off and run it. Customers come in periodically throughout the year with oil leaks. I pressure wash the equipment and can rarely find the leak. Remember there are about 8 places a small engine can leak from.