help with Raptor Gas leak

[wd4ngb]

I am in the process of servicing my Raptor, Oil, Filter, Blades, Fuel Filter, and saw this Vent Filter. Decided I would put a fresh one on. Well, I got the hoses off the top, and then pulled up an the filter to be able to remove the hose off the bottom. It cam off, but I can not even find it to reconnect it. Where does that sneaky little sucker go to? I tried to see on the drawing, and photos, but can not see it. Help, I have fallen and can't get up.

Where does the hose go to that Was on the bottom of this evap filter?

wd4ngb@qsl.net

Heading back out there with the wheel off, looking for than sneaky sucker.

 

[Mr. Mower]

Sub'd

 

[bertsmobile1]

Nothing goes on the end of that filter.
It is there to allow air INTO the fuel tank so the fuel can get out.

 

[wd4ngb]

Mine must of had just a short piece of hose hooked to the bottom of the filter, which I pushed off. I looked on the floor after completing everything, and found nothing. I guess it is laying on something under there. Thanks

 

[Craptor Owner]

A video that 577 Jersey posted back in May covered this, he has a few other modifications so I thought I would add the video

All good tips to make the Raptor a better working unit. Too bad Hustler did not think much of this through when designing or engineering the mowers.