bumped a key/????? Bought a new one 10 months ago. Now 14.5 hours on it. Only used NON alcohol gas with 1 oz per gallon of "SEA FOAM" ran every 30 days and started on first pull. Always warmed 5 min before any load, and then very light load for first few splits, on my log splitter. Sat, after the 30 days, it did start, but ran very rough, then only on full choke, split 4 very small limbs, it quit. No attempt to even try. As it left the piston 18" out of the cylinder, I removed the air filter, using an eye dropper added some gas, and it ran about 5 to 7 seconds, but long enough to retract the piston. I have NOT had time to check to see if there is gas in the carb bowl, but this is exactly what the first engine did. IF there is gas in the bowl, but it does try to start when dribbling direct into air intake, what on earth can be wrong. TWO motors, exhibit the same symptom, what am I missing?