Greetings All,

[Hcube]

Hello, just signed on. I live in Marshall, Texas, retired and like to piddle. (I'm real good at it.)

I own a Troybuilt ZRT mower, Kohler engine and cuts 50 inches. I have lots of different interest.
Like small engines, making things, computers.

One of the transaxles on my mower has quit pulling, so need to repair or replace. Thought I would
check on this site and see what some of you can comment on doing this.

Glad to be here. Will check out topics.

Hcube

 

[7394]

Welcome, I think "those that knows" will chime in as they find time.

 

[bertsmobile1]

:welcome:
Thanks for posting a howdy doody.
Now pop over to the Troy-built section and start a new thread with your problem in the heading
Something like" troy-built ( model ) with hydro problems"
Then include the full model numbers off the ID tag.
On the hydros there will also be a tag with the makers name and model number.

And just to double check things ensure that the bypass valve is in the run position.

 

[Catherine]

:welcome:

Welcome to the forum!

 

[RjMaan]

Thanks to be a part of this forum and as far as your question is concern, see what suites you. whether repair is cheaper than replace or not.

 

[dev20tx]

Hello!