Gravely ZT HD 60 Clutch 4 wires need help

Flick

Flick

Forum Newbie
Joined
Sep 2, 2025
Messages
8
hit a branch while cutting the PTO Clutch stopped working so I took a look and seen two wires free.
I could not find out were they went I looked everywhere. so I was wondering if anyone could help me please.
4 wires two still hooked up and two not.Gravely clutch wire.jpeg
 

Attachments

  • Gravely Engine.jpeg
    Gravely Engine.jpeg
    185.7 KB · Views: 12
  • Gavely Mower.jpeg
    Gavely Mower.jpeg
    204.6 KB · Views: 11
Flick said:
hit a branch while cutting the PTO Clutch stopped working so I took a look and seen two wires free.
I could not find out were they went I looked everywhere. so I was wondering if anyone could help me please.
4 wires two still hooked up and two not.View attachment 71716
Click to expand...
We need your product label information off of the machine. They have serial number differences and harnesses are usually different among them.
 
it should be a late model 991084.
 
Last edited:
Looks like the connector pins got ripped off of the diode possibly. Maybe the diode got ripped out of the harness.
 
Auto Doc's said:
We need your product label information off of the machine. They have serial number differences and harnesses are usually different among them.
Click to expand...
 

Attachments

  • Gravely Model Number.jpeg
    Gravely Model Number.jpeg
    140.3 KB · Views: 12
Yes according to diagram there is a 10 amp near the PTO relay. Just have to trace the wiring to find it. Sorry I don't have a 991166 here to look at.
 
StarTech said:
Yes according to diagram there is a 10 amp near the PTO relay. Just have to trace the wiring to find it. Sorry I don't have a 991166 here to look at.
Click to expand...
fuse is good, can you tell me what to check next?
I do ty for your help, I would love to get this fixed.
 
You must log in or register to reply here.
Back
Top