Works well with the older metal tanks to get dirt and rust loose from inside the tank, but could cause damage to the internal filter in push mower tanks.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Fuel Filters in B&S Walk Behind Mowers
- Thread starter seattlepioneer
- Start date
More options
Export threadRick42wood
Member
- Joined
- Jun 9, 2019
- Threads
- 2
- Messages
- 24
Thanks, that’s kinda what I thought but it didn’t make sense since the fuel tank is higher than the carb. I didn’t think small engines had them. Good to know.
Take a picture and post it up here. Or a video would be helpful.I have a Craftman Ride On, the fuel line gos from the tank, through an in-line filter, then to something mounted on the engine that has a line from it to the carb, and another line to the manifold. It is about 2 inches round, and 1/2 inch thick, what is it?
slomo
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 65
- Messages
- 24,995
It is the fuel pump.
the side that goes to the carb has a check valve in it and the line from the engine has a diaphragm that goes in & out with pressure cycled from the crankcase.
IT should be marked with arrows.
The in side & induction tubes are together the output is all by itself.
the side that goes to the carb has a check valve in it and the line from the engine has a diaphragm that goes in & out with pressure cycled from the crankcase.
IT should be marked with arrows.
The in side & induction tubes are together the output is all by itself.