Hi Everybody, I am new here. I have a sears Craftsman 30 inch 420cc riding mower. It starts when the carb is primed but then as it reaches normal idle it dies. Screwed into the bowl of the carburator is a brass piece that has wires leading to it. I am wondering if it may be the culprit? Please let me know your thoughts.
Engine starts when carb is primed
- Thread starter Ss4000
- Start date
sgkent
Lawn Addict
- Joined
- Sep 27, 2017
- Threads
- 33
- Messages
- 1,695
my instinct tells me you need to take it to a mechanic. Any gasoline engine needs 3 things to run. The first step in any solution is to figure which of those three things is missing. The first step comes before starting to take things apart or guessing what part might be the culprit.
My guess is that fuel is missing. That can be a bad fuel pump, clogged fuel filter, or power to the cutoff solenoid if that is what your carb has. It can also be a plugged needle valve, or air or fuel jet.
My guess is that fuel is missing. That can be a bad fuel pump, clogged fuel filter, or power to the cutoff solenoid if that is what your carb has. It can also be a plugged needle valve, or air or fuel jet.
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 65
- Messages
- 24,995
Your main jet is clogged
When you prime you flood the carb so it gets enough fuel to start but it is not getting enough to run
The solenoid simply shoves a spring loaded bung into the feed tube for the main jet when the mower is turned off
When the key is on it should be energised and the bung pulled back .
Instructions for cleaning your carburettor is found at outdoor power info
When you prime you flood the carb so it gets enough fuel to start but it is not getting enough to run
The solenoid simply shoves a spring loaded bung into the feed tube for the main jet when the mower is turned off
When the key is on it should be energised and the bung pulled back .
Instructions for cleaning your carburettor is found at outdoor power info