Nomis123
Forum Newbie
- Joined
- Jun 13, 2020
- Threads
- 1
- Messages
- 2
Hi there.
First time post so please go easy on me. I have a Toro zero turn Mx6000 and I am getting a massive amount of slapping with the belt for deck drive when it is not engaged. I replaced the clutch as I was told that this was the issue and the clutch had some wiring issues that needed to be fixed.
Any thoughts on what could be wrong? Seems like the main shaft out of the engine is straight and the mower only has 230 hours on it so plenty more life left in it.
not sure what your thoughts are on what else this could be. I have rebuilt all of the spindles on the deck and checked and the tensioner spring is working as expected
thanks in advance
Simon
First time post so please go easy on me. I have a Toro zero turn Mx6000 and I am getting a massive amount of slapping with the belt for deck drive when it is not engaged. I replaced the clutch as I was told that this was the issue and the clutch had some wiring issues that needed to be fixed.
Any thoughts on what could be wrong? Seems like the main shaft out of the engine is straight and the mower only has 230 hours on it so plenty more life left in it.
not sure what your thoughts are on what else this could be. I have rebuilt all of the spindles on the deck and checked and the tensioner spring is working as expected
thanks in advance
Simon